WK-59-2000 Series Stationary Adjustable Stand:

  • Rack and pinion raising mechanism with collar lock and safety ratchet pawl; adjustable tension assembly; elevation tube has a 2.687-20 thread which allows for various adapters and assessors as well as custom attachments to be easily interchanged; 3 swivel casters with rubber tires
  • Heavy duty lift locking mechanism raises and lowers stand on casters for mobility.
  • A U.S. standard 3½” x 8” thread is machined in the head for instrument attachment. the column is hollow to permit downward sighting, with a clear 2.0” diameter aperture.
  • Provided with rubber shock bumpers and a shock-resistant plastic thread cap. The floor space required for both stands is 32½” x 37½”.
  • Available in a low movable stand– 28” to 44” (WK-59-2310) and a high moveable stand– 42” to 69” (WK-59-2320).

 

580810 Heavy-Duty Portable Stand:

  • Various combinations of the 580810’s components allow instrument mounting heights of 2” to 55½” (5 – 141 cm) from the floor.
  • The stand allows you to make precision vertical and horizontal adjustments to solve a multitude of instrument location problems.
  • Comes with a set of short legs, a set of long legs, and a set of trivet points that may be mounted directly in the three sockets on the tribrach plate, for setting the stand almost directly on the floor or other work surface.
  • It is also supplied with a short and long intermediate tube.
  • Equipped not only with the 3½” x 8 standard external instrument mount threads, but also a dovetail receptacle and the 2.825” x 20 internal thread.

 

WK-59-3500 Stand Extensions:
Each WK-59-3500 series stand extension piece increases the maximum height of Warren-Knight tripods and stands. Fitted with a 3½” x 8” male and female thread. Hollow for vertical center line plumbing.

Model Variations:

  • WK-59-3503: 3 inch
  • WK-59-3505: 5 inch
  • WK-59-3510: 10 inch
  • WK-59-3520: 20 inch
  • WK-59-3540: 40 inch

 

586632 Swivel Head:

  • Allows you to turn your instrument to any azimuth position. May be continuously rotated in either direction, and locked into the desired position with a large knob.
  • Attaches to any stand or other accessory having a 3½” x 8 external thread. Provides the means to mount any standard instrument or other accessory.

 

WK-59-2350 Elevation Tripod

  • The superb torsional rigidity of the WK-59-2350 elevation tripod series is matched by its support strength (150 lbs., 68 kg).
  • The WK-59-2350 has a load capacity of 150 lbs. (68 kg) with a maximum height of 72” and a minimum height of 33.5”.
  • The tripod weighs 23 lbs. with a maximum spread of 73” (185 cm).
  • It has a foot plate diameter of 4” (10 cm) for self-leveling and a 5/8” hole for spiking.
  • Also available in a shorter height (WK-59-2330) with a maximum height of 57” and a minimum height of 26”.